Home | About Us | Research | Consultancy | Collaborations | Facilities | Events | Join Us | Annual Reports | Contact Us | Useful Links

Publications

Journal paper - 2014

1.       Cao, Z.C., Cheung, C.F., "Theoretical modelling and analysis of the material removal characteristics in fluid jet polishing”, International Journal of Mechanical Sciences, Vol. 89, pp. 158-166 (Dec 2014)
 
2. Wang, S. J., To, S, Chen, X., Chen, X. D., Ouyang, X. B. Ouyang, “An integrated optimization of cutting parameters and tool path generation in ultraprecision raster milling, The International Journal of Advanced Manufacturing Technology, Vol. 75, No. 9-12, pp. 1711-1721 (Dec 2014)
 
3.      To, S., Zhang, G. Q., “Study of cutting force in ultra-precision raster milling of V-groove”, The International Journal of Advanced Manufacturing Technology, Vol .75, Issue 5-8, pp 967-978 (Nov 2014)
 
4. Gao, L., To, S., Yang, H.F., Nie, X., Liu, T. C., and Xue, C. X., “Effect of assembling errors on the diffraction efficiency for multilayer diffractive optical elements”, Applied Optics, Vol. 53, Issue 31, pp. 7341-7347 http://dx.doi.org/10.1364/AO.53.007341(Nov 2014)
 
5.       Li, D., Cheung, C.F., Ren, M., Zhou, L., Zhao X., “Autostereoscopy-based three-dimensional on-machine measuring system for micro-structured surfaces”, Optics Express, Vol. 22, No. 21, pp. 25635-25650 (Oct 2014)
 
6. Zhang, G.Q., To, S., Xiao, G.B., “Novel tool wear monitoring method in ultra-precision raster milling using cutting chips”, Precision Engineering, Vol. 38, pp.555-560 (Jul 2014)
 
7.       Xue, C.X., To, S., “Analysis of materials selected for multilayer diffractive optical elements”, Optik, Vol. 125, No.13, pp. 3245-3248 (Jul 2014)
 
8. Zhang, G.Q., To, S., Xiao, G.B., “The relation between chip morphology and tool wear in ultra-precision raster milling”, International Journal of Machine Tools & Manufacture, No. 80-81, pp. 11-17 (May-June 2014)
 
9.       Du, J.J., Zhang, G.Q., Liu, T., To, S., “Improvement on load performance of externally pressurized gas journal bearings by opening pressure-equalizing grooves”, Tribology International , Vol. 73, pp. 155-166 (May 2014)
 
10. Zhang, S.J., To, S., Cheung, C.F., Zhu, Y.H., “Micro-structural changes of Zn-Al alloy influencing micro-topographical surface in micro-cutting”, International Journal of Advanced Manufacturing Technology, Vol. 72, pp. 9-15 (Apr 2014)
 
11.       Kong, L., Cheung, C.F., To S., Wang, B., Ho L.T., “A theoretical and experimental investigation of design and slow tool servo machining of freeform progressive addition lenses (PALs) for optometric applications”, International Journal of Advanced Manufacturing Technology, Vol.72, pp. 33-40 (Apr 2014)
 
12. Kong, L.B., Cheung, C.F., Kwok, T.C., “Theoretical and experimental analysis of the effect of error motions on surface generation in fast tool servo machining”, Precision Engineering, Vol. 38, No. 2, pp. 428-438 (Apr 2014)
 
13.       Zhang, G.Q., To, S., Xiao, G.B., “A novel spindle inclination error identification and compensation method in ultra-precision raster milling”, International Journal of Machine Tools & Manufacture, Vol.78, pp.8-17 (March 2014)
 
14.       Zhang, G.Q., To, S., Du, J.J., “Study of the workspace of a class of universal joints”, Mechanism and Machine Theory, Vol.73, pp. 244-258 (March 2014)
 
15. Lee, W.B.R., Wang, H., To S., Cheung C.F., Chan C.Y., “Mesoplasticity approach to studies of the cutting mechanism in ultra-precision machining”, Chinese Journal of Mechanical Engineering (English Edition), Vol. 27, No. 2, pp. 219-228 (Mar 2014)
 
16.       Wang S.J., To, S., Chen, X., Wang, H., Xia, H.J. , “A study of the fabrication of v-groove structure in ultra-precision milling”, International Journal of Computer Integrated Manufacturing, Vol. 27, No. 11, pp. 986-996, http://dx.doi.org/10.1080/0951192X.2013.869835 (Online Jan 2014)
 
17.       Cheung, C.F, Ren, M., Kong, L., Whitehouse, D., "Modelling and analysis of uncertainty in the form characterization of ultra-precision freeform surfaces on coordinate measuring machines”, CIRP Annals - Manufacturing Technology , Vol. 63, No. 1, pp. 481-484 (2014)
 

Journal paper - 2013

1.       Zhang, S.J., To, S., “A theoretical and experimental study of surface generation under spindle vibration in ultra-precision raster milling”, International Journal of Machine Tools and Manufacture, Vol. 75, pp. 36-45 (Dec 2013)
 
2. Lee, W.B., Wang, H., Chan, C.Y., To, S., “Finite element modelling of shear angle and cutting force variation induced by material anisotropy in ultra-precision diamond turning”, International Journal of Machine Tools & Manufacture, Vol. 75, pp82-86 (Dec 2013)
 
3.      To, S, Wang, H., Jelenkovićz, E. V., “Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting”, International Journal of Machine Tools and Manufacture, Vol. 74, pp. 50-55 (Nov 2013)
 
4. Lee, W.B., Kong, L.B., Cheung, C.F., To S., Chen, X., Liu, Q., "An overview of ultra-precision diamond machining of microstructured freeform surfaces”, Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, Vol.49, No.19, pp.144-155 (Oct 2013)
 
5.       Chan, C.Y., Lee, W.B., Wang, H., “Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning”, International Journal of Machine Tools and Manufacture, Vol. 73, pp. 62-70 (Oct 2013)
 
6. Jelenkovic, E.V., Kovacevic, M.S., Stupar, D.Z., Bajic, J.S., Slankamenac, M.P., Kovacevic, M., To, S., “N-channel polysilicon thin film transistors as gamma-ray detectors”, Measurement Science & Technology, Vol, 24, No. 10, paper no: 105103, DOI: 10.1088/0957-0233/24/10/105103 (Oct 2013)
 
7.       Chan, C.Y., Lee, W.B., Wang, H., “Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning”, International Journal of Machine Tools and Manufacture, Vol. 73, pp. 62-70 (Oct 2013)
 
8. Jelenkovic, E.V., Kovacevic, M.S., Stupar, D.Z., Bajic, J.S., Slankamenac, M.P., Kovacevic, M., To, S., “N-channel polysilicon thin film transistors as gamma-ray detectors”, Measurement Science & Technology, Vol, 24, No. 10, paper no: 105103, DOI: 10.1088/0957-0233/24/10/105103 (Oct 2013)
 
9.       Zhang, S.J., To, S., “A theoretical and experimental investigation into multimode tool vibration with surface generation in ultra-precision diamond turning”, International Journal of Machine Tools and Manufacture, Vol. 72, pp. 32–36, Ref. No.: IJMACTOOL-D-13-00317R1, (Online May 2013) (Sep 2013)
 
10. Kong, L.B., Cheung, C.F., To, S., Cheng, C.T., "Modeling and characterization of generation of 3D micro-structured surfaces with self-cleaning and optical functions", Optik, Vol. 124, No. 17, pp. 2848-2853 (Sept 2013)
 
11.       Zhang, S.J., To, S., Wang, H.T., "A theoretical and experimental investigation into five-DOF dynamic characteristics of an aerostatic bearing spindle in ultra-precision diamond turning". International Journal of Machine Tools & Manufacture, Vol. 71, pp.1-10 (Online Mar 2013) (Aug 2013)
 
12. Zhang, S.J., To, S. "The effects of spindle vibration on surface generation in ultra-precision raster milling". International Journal of Machine Tools & Manufacture, Vol. 71, pp.52-56 (Online 29 Apr 2013) (Aug 2013)
 
13.       Wang, H., To, S. and Chan, C.Y., Chan, “Investigation on the influence of tool-tip vibration on surface roughness and its representative measurement in ultra-precision diamond turning”, International Journal of Machine Tools and Manufacture, Vol. 69, pp. 20–29, (Jun 2013)
 
14.       Ren, M.J., Cheung, C.F., Kong, L.B., "A bidirectional curve network based sampling method for enhancing the performance in measuring ultra-precision freeform surfaces”, Precision Engineering, Vol. 37, No. 2, pp. 345-352 (Apr 2013)
 
15. Jelenkovićz, Emil V. and To, S., “Partial oxidation of thin film ruthenium in MOS structure-chemical, compositional and electrical properties” ECS Solid State Letter, Vol. 2, issue 5, pp. 42-43 (Mar 2013)
 
16.       Wang, S.J., To, S., Cheung, C.F., "An investigation into material-induced surface roughness in ultra-precision milling”, International Journal of Advanced Manufacturing Technology, Vol. 68, pp. 607-616 (2013)
 

Journal paper - 2012

1.       Kong, L. B., Cheung, C. F., “Modeling and characterization of surface generation in fast toolservo machining of microlens arrays”, Computers & Industrial Engineering, Vol. 63, Issue: 4,pp 957-970, DOI: 10.1016/j.cie.2012.06.007 (Dec 2012)
 
2. Zhang, S.J. , To, S., Cheung, C.F., Wang, H.T., “ Dynamic characteristics of an aerostatic bearing spindle and its influence on surface topography in ultra-precision diamond turning” International Journal of Machine Tools and Manufacture, Vol. 62, pp.1 -12 (Nov 2012)
 
3.      Zhang, D., To, S., Zhu, Y. H., Wang, H., Tang, G.Y., “Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91”, International Journal of Materials Research, Vol. 103, Issue: 10, pp. 1205-1209, DOI:10.3139/146.110758 (Oct 2012)
 
4. Kong, L. B., Cheung, C. F., To, S., “Design, fabrication and characterization of three dimensional patterned microstructured surfaces with self-cleaning properties from hydrophilic materials”, Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture, Vol. 226, Issue: B9, pp. 1536-1549, DOI: 10.1177/0954405412447483 (Sep 2012)
 
5.       Zhang, S.J., To, S., Cheung, C.F., Du, J.J., “Novel Auto-regressive Measurement of Diamond Tool Wear in Ultra-precision Raster Milling”, International Journal of Precision Engineering and Manufacturing, Vol. 13, Issue: 9, pp. 1661-1670, DOI: 10.1007/s12541-012-0218-9 (Sep 2012)
 
6. Wang, S. J., To, S. and Cheung, C. F., “Effect of Workpiece Material on Surface Roughness inUltraprecision Raster Milling”, Materials and Manufacturing Processes, Vol. 27, Issue 10 (Sep2012)
 
7.       Zhu, Y. H., To, S., Liu, X. M., “Influence of Spinodal Decomposition on the Plastic Behavior of Dynamic Electropulsing Treated ZA22 Alloy”, Materials Transactions, Vol. 53, Issue: 8, pp.1363-1370, DOI: 10.2320/matertrans.M2012024 (Aug 2012)
 
8. Ren, M. J., Cheung, C. F., Kong, L. B., “A task specific uncertainty analysis method for least squares-based form characterization of ultra-precision freeform surfaces”, Measurement Science& Technology, Vol. 23, Issue: 5, Article Number: 054005, DOI: 10.1088/0957-0233/23/5/054005 (May 2012)
 
9.       Ren, M. J., Cheung, C.F.; Kong, L.B.; Jiang, X.Q., “Invariant-Feature-Pattern-Based Form Characterization for the Measurement of Ultraprecision Freeform Surfaces”, IEEE Transactionson Instrumentation and Measurement, Vol.61, Issue: 4, pp 963-973, DOI: 10.1109/TIM.2011.2173047(Apr 2012)
 
10. Cheung, C.F., Kong, L.B., Rena, M. J., Whitehouse, D. and To, S., “Generalized form characterization of ultra-precision freeform surfaces”, CIRP Annals- Manufacturing Technology, Vol. 61, No.1, pp.527-530, Available online (Apr 2012). (PolyU 5141/08E)
 
11.       Kong, L. B., Cheung, C. F., “Prediction of surface generation in ultra-precision raster milling of optical freeform surfaces using an Integrated Kinematics Error Model”, Advances in Engineering Software, Vol. 45, Issue: 1, pp.124-136, DOI: 10.1016/j.advengsoft.2011.09.011 (Mar 2012)
 
12. Ho, L.T., Cheung, C.F., To, S., “An experimental investigation of surface generation using an integrated ultra-precision polishing process and different polishing trajectories”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226 No. 2, pp. 203-220 (Feb 2012)
 
13.       Zhang, D., To, S., Zhu, Y.H., Wang, H. Tang, G.Y., “Dynamic electropulsing induced phase transformations and their effects on ultra-precision machining of a cold-rolled alloy AZ91”, Journal of Surface Engineered Materials and Advanced Technology, Vol. 2, No. 1, pp. 16-21, (Jan 2012)
 
14.       Ho, L.T., Cheung, C.F., “A study of characterisation of surface generation in ultra-precision polishing using power spectrum analysis”, International Journal of Nanomanufacturing, Vol. 8, pp. 140-160 (Jan 2012)
 
15. Lee, W.B., Wang, H., To, S., Cheung, C.F., “Applications of Ultra-precision Free-form Machining Technology to Advanced Optics”, Materials Science Forum, Vol. 697-698, pp. 834-837 (2012) (ITS/256/09, PolyU5291/08E)
 
16.       Zhang, D., To, S., Zhu, Y.H., Wang, H. and Tang, G.Y., “Static electropulsing-induced microstructural changes and their effect on the ultra-precision machining of cold-rolled AZ91alloy”, Metallurgical and Materials Transactions A, Vol 43, Issue 4, pp.1341- 1346 (2012)
 

Journal paper - 2011

1.       Cheng, C.T., To, S., Chan, C.Y., Cheung, C.F., “An investigation on the effect of ultra-precision machined patterns in wetting transition”, International Journal of Nanomanufacturing, Vol. 7, No. 3-4, pp.245-266, 2011.
 
2. Cheung, C.F., Kong, L.B., Ho, L.T., To, S., “Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing”, Precision Engineering-Journal of The International Societies for Precision Engineering And Nanotechnology, Vol. 35 (4) pp.574-590, 2011.
 
3. Cheung,C.F., “Design, ultra-precision polishing and measurement of superfinished orthopaedic implants for bio-medical applications: An integrated approach”,International Journal of Nanomanufacturing,Vol.7,pp. 393-408,2011.
 
4. Kong, L. B., Cheung, C. F., “Design, fabrication and measurement of ultra-precision micro-structured freeform surfaces”, Computers & Industrial Engineering, Vol. 61(1) pp. 216-225, 2011.
 
5. Kong, L. B., Cheung, C. F., Jiang, J. B., To, S., Lee, W.B, “Characterization of freeform optics in automotive lighting systems using an Optical-Geometrical Feature Based”, Optik, Vol.122, No. 4, pp. 358-363, 2011.
 
6. Li, Z.Z., Wang, J.M.; Peng, X.Q., Ho, L.T., Yin, Z.Q., Li, S. Y., Cheung, C. F., “Removal of single point diamond-turning marks by abrasive jet polishing”, Applied Optics, Vol. 50, No.16, pp. 2458-2463, 2011.
 
7. Ren, M. J., Cheung, C. F., Kong, L. B., “A robust surface fitting and reconstruction algorithm for form characterization of ultra-precision freeform surfaces”, Measurement, Vol. 44, No.10, pp. 2068-2077, 2011.
 
8. To, S., Wang, H., “Finite element modelling of squeezing effect in ultra precision diamond turning”, Materials Research Innovations, Vol. 15(1) pp. S175-S178, 2011.
 
9. To S., Wang, S.J., “An Investigation on Surface Generation in Ultra-precision Raster Milling”, International Journal of Nanomanufacturing, Vol. 7, No.3-4 pp. 298-310, 2011.
 
10. Wang, H., To, S., “A study on tool wear in ultra-precision diamond turning with finite element modelling”, International Journal of Nanomanufacturing, Vol. 7, No. 5-6, pp. 500-516, 2011.
 
11. Wang, H., To, S. Chan, C. Y., Cheung, C. F.,  Lee, W. B., “Dynamic modelling of shear band formation and tool-tip vibration in ultra-precision diamond turning”,  International Journal of Machine Tools & Manufacture, Vol. 51, No. 6, pp. 512-519, 2011.
 
12. Zhu, Y.H., To, S., Liu, X.M, Hu, G.L., “Effect of Static Electropulsing on Microstructure and Elongation of a Zn-Al Alloy (ZA22)”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 42A, No. 7, pp.1933-1940, 2011.
 
13. Zhu, Y.H., To, S., Liu, X.M., Hu, G.L., Xu, Q., “Static Electropulsing-induced Phase Transformations of a Cold-deformed ZA27 alloy”, Journal of Materials Research, Vol. 26, No. 14, pp.1696-1701, 2011.
 
14. Zhu, Y. H.; To, S., Liu, X. M., “Use of EBSD to study electropulsing induced reverse phase transformations in a Zn-Al alloy (ZA22)”, Journal of Microscopy, Vol. 242, No. 1, pp. 62-69, 2011.
 

Journal paper - 2010

1.   Cheung, C.F., Hu, K., Jiang, X.Q. and Kong, L.B., “ Characterization of surface defects in fast tool servo machining of microlens array using a pattern recognition and analysis method, Measurement ,Vol. 43, Issue 9, pp. 1240-1249. (Nov 2010a) (SCI Impact Factor 2010: 0.846)
 
2. Cheung, C. F., Kong, L. B., Ren, M. J., “Measurement and characterization of ultra-precision freeform surfaces using an intrinsic surface feature-based method” Measurement Science & Technology, Vol. 21, Issue 11, Article Number: 115109, DOI: 10.1088/0957-0233/21/11/115109 (Nov 2010b). (SCI Impact Factor 2010: 1.353) (EI Indexed)
 
3. Kong, L.B., Cheung, C.F., Lee, W.B., To, S., “An integrated manufacturing system for the design, fabrication, and measurement of ultra-precision freeform optics” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 33, Issue 4, pp. 244-254 (Oct 2010a). (SCI Impact Factor 2010: 0.892)
 
4. Kong, L.B., Cheung, C.F., Jiang, X.Q., Lee, W.B., To, S., Blunt, L., Scott, P., “Characterization of surface generation of optical microstructures using a pattern and feature parametric analysis method”, Precision Engineering – Journal of the International Societies for Precision Engineering and Nanotechnology, Vol. 34, Issue 4, pp. 755-766 (Oct 2010b). (SCI Impact Factor 2010: 1.619)
 
5. Kwok, T.C., Cheung, C.F., Kong, L.B., To, S., Lee, W.B., “Analysis of surface generation in ultra-precision machining with a fast tool servo”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 224, Issue B9, pp. 1351-1367 (2010). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
6. Lee, W.B., Cheung, C.F., To, S., Kong, L.B., Jiang, J.B., “Integrated manufacturing technology for design, machining and measurement of freeform optics”, Chinese Journal of Mechanical Engineering, Vol. 46, No. 11, pp.137-148 (2010). (SCI Impact Factor 2010: 0.194) (EI Indexed)
 
7. Lee, W.B., Cheung, C.F., To, S., Kong, L.B., Jiang, J.B, “Ultra-precision machining technology of freeform optics and its applications”, Infrared and Laser Engineering, Vol. 39, No. 1, pp.110-115 (2010).
 
8. Weng C., Lee, W.B., To, S., “A study of the relevant effects on the maximum residual stress in the precision injection moulding of microlens arrays”, Journal of Micromechanics and Microengineering, Vol. 20, Issue 3, Article Number: 035033 (Mar 2010). (SCI Impact Factor 2010: 2.281) (EI Indexed)
 
9.   Zhu, Y.H., To, S., Lee, W.B., Zhang, S.J., Cheung, C.F., “Ultra-precision raster milling-induced phase decomposition and plastic deformation at the surface of a Zn–Al-based alloy”, Scripta Materialia, Vol. 62, Issue 2, pp.101-104, available online 24 Sep 2009 (Jan 2010). (SCI Impact Factor 2010: 2.820) (EI Indexed)
 
10.   Cheung, C.F., Ho, L.T., Charlton, P., Kong, L.B., To, S., Lee, W.B., “Analysis of surface generation in the ultraprecision polishing of freeform surfaces”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 224, Issue B1, pp. 59-73 (2010). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
11. Jiang, J.B., To, S., Lee, W.B. C.F. Cheung, “Optical design of a freeform TIR lens for LED streetlight”, Optik, Vol.121, pp.1761-1765 (2010) (SCI Impact Factor 2010: 0.454) (EI Indexed)
 

Journal paper - 2009

1.   Cheung, C.F., Kong, L.B., To, S. and Lee, W.B. “Measuring ultra-precision freeform surfaces using a hybrid fitting and matching method” Measurement Science & Technology, Vol. 20, Issue 10, Article Number: 105103 (Oct 2009). (SCI Impact Factor 2010: 1.353) (EI Indexed)
 
2.  Kong, L.B., Cheung, C.F., To, S and Lee, W.B., “An investigation into surface generation in ultra-precision raster milling”, Journal of Materials Processing Technology, Vol. 209, No.8. pp. 4178-4185 (Apr 2009). (SCI Impact Factor 2010: 1.570) (EI Indexed)
 
3.  Wang, W.K., To, S., Cheung, C.F., Jiang, J.B. and Wang, B. “A new method to test the photometric characteristics of lamps for motor vehicles”, Optik, Vol. 120, Issue 11, pp. 549-552 (Jun 2009). (SCI Impact Factor 2010: 0.454) (EI Indexed)
 
4.  Weng, C., Lee, W.B., To, S., “Birefringence techniques for the characterization of residual stresses in injection-moulded micro-lens arrays”, Polymer Testing, Vol. 28, Issue 7, pp.709-714, available online 30 Jun 2009 (Oct 2009). (SCI Impact Factor 2010: 2.016) (EI Indexed)
 
5.  Weng, C., Lee, W.B. and To, S., “Numerical simulation of residual stress and birefringence in the precision injection molding of plastic microlens arrays”, International Communications in Heat and Mass Transfer, Vol. 36, pp.213-219 (2009). (SCI Impact Factor 2010: 1.609) (EI Indexed)
 
6.  Yin, Z. Q., To, S., Lee, W. B., “Wear characteristics of diamond tool in ultraprecision raster milling”, International Journal of Advanced Manufacturing Technology, Vol. 44, No 7-8, pp. 638-647 (Oct 2009). (SCI Impact Factor 2010: 1.071) (EI Indexed)
 

Journal paper - 2008

1.   Cheng M.N., Cheung, C.F., Lee, W.B., To, S. and Kong, L.B. “Theoretical and experimental analysis of surface generation in ultra-precision raster milling”, International Journal of Machine Tools and Manufacture, Vol.48, Issue 10, pp.1090-1102 (Aug. 2008). (SCI Impact Factor 2010: 1.919) (EI Indexed)
 
2. 蒋金波,杜雪,李荣彬,“自由曲面的LED路灯透镜的设计”,液晶与显示,第23期,第5卷,589-594页,2008。
 
3. 蒋金波,杜雪,李荣彬,“汽车照明系统的设计及超精密自由曲面加工技术”,照明工程学报,第19期,第3卷,46-52页,2008年。
 
4. Kong, L.B., Cheung, C.F., To, S., Lee, W.B., Du, J.J. and Zhang, Z.J., “A kinematics and experimental analysis of form error compensation in ultra-precision machining”, International Journal of Machine Tools and Manufacture, Vol. 48, Issues 12-13, pp. 1408-1419 (Oct 2008). (SCI Impact Factor 2010: 1.919) (EI Indexed)
 

Journal paper - 2007

1.   Cheung, C.F., Li, H.F., Lee, W.B., To, S. and Kong, L.B., “An integrated form characterization method for measuring ultra-precision freeform surfaces”, International Journal of Machine Tools and Manufacture, Vol. 47, Issue 1, Pages 81-91, January (2007a). (SCI Impact Factor 2010: 1.919) (EI Indexed)
 
2. Kong, L.B., Cheung, C.F., To, S., Lee, W.B. and Cheng, K.W. and Cheung, C. “Measuring optical freeform surfaces using a coupled reference data method”, Measurement Science & Technology, Vol. 18, pp.2252-2260 (2007a) (SCI Impact Factor 2010: 1.353) (EI Indexed)
 
3. Lee, W.B., Cheung, C.F., Li, J.G., To, S., Du, J.J., Yin, Z.Q., “Development of a virtual machining and inspection system for ultra-precision diamond turning”, Proceedings of The Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture, Vol. 221, Issue 7, pp. 1153-1174 (2007). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
4. 杜雪,王尔祺,李荣彬,张志辉, “自由曲面光学透镜注射成型误差因素研究”, 应用光学, 第6期, 第28卷, 684-688頁, 2007年。 (EI indexed)
 
5. Cheng, M.N., Cheung, C.F., Lee, W.B., To, S. “A study of factors affecting surface quality in ultra-precision raster milling”, Key Engineering Materials, Vol.339, pp. 400-406 (2007). (EI Indexed)
 
6. Cheung, C.F., Lee, W.B., To, S., Li, H.F. and Wang, S.J., “A framework of a model-based simulation system for the prediction of surface generation in fast tool servo machining of optical microstructures”, Key Engineering Materials, Vol. 339, pp.407-411 (2007b). (EI Indexed)
 
7. Kong, L.B., Cheung, C.F., Lee, W.B. and To, S., “A framework of an integrated platform for modelling and measurement of freeform surface generation in ultra-precision raster milling”, Key Engineering Materials, Vol. 339, pp.422-426 (2007b). (EI Indexed)
 
8. Li, H.F., Cheung, C.F., Kong, L.B., Lee, W.B., and To, S. “A study of measurement technology for ultra-precision freeform surfaces”, Key Engineering Materials, Vol.339, pp 417-421 (2007). (EI Indexed)
 
9. To, S., Cheung, C.F., Lee, W.B. and Wang, S.J. “A study of micro v-groove fabrication in ultra-precision freeform machining”, Key Engineering Materials, Vol.339, pp 286-290 (2007). (EI Indexed)
 
10. Wang, S.J., Cheung, C.F., To, S. and Lee, W.B. “Fabrication of freeform optics in ultra-precision raster milling”, Key Engineering Materials, Vol.339, pp 412-416 (2007). (EI Indexed)
 

Journal paper - 2006

1.   Cheung, C.F., Li, H.F., Kong, L.B., Lee, W.B. and To, S., “Measuring ultra-precision freeform surfaces using a robust form characterization method”, Measurement Science & Technology, Vol. 17, pp.488-494 (2006a). (SCI Impact Factor 2010: 1.353) (EI Indexed)
 
2. Cheung, C.F., Kong, L.B., Lee, W.B. and To, S., “Modelling and simulation of freeform surface generation in ultra-precision raster milling”, Proceedings of The Institute of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. B11, pp.1787-1801 (2006b). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
3. Gao, D., To, S. and Lee, W.B., “Tool path generation for machining of optical freeform surfaces by an ultra-precision multiaxis machine tool”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 220, No. 12, pp.2021-2026, (Dec 2006). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
4. Kong, L.B, Cheung, C.F., Gao, D., Lee, W.B., To, S., “Theoretical and experimental evaluation of surface quality for ultra-precision freeform surfaces”, Proceedings of The Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. B9, pp.1439-1448 (2006). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
5. Li, H.F., Cheung, C.F., Jiang, X.Q., Lee, W.B. and To, S. “A novel robust gaussian filtering method for the characterization of surface generation in ultra-precision machining”, Precision Engineering, Vol. 30, Issue 4, pp. 421-430, (Oct 2006). (EI Indexed)
 
6. To, S., Wang, E.Q., Lee, W.B. and Cheung, C.F., “Investigation into virtual manufacturing procedure for freeform optics”, Journal of Applied Optics, Vol. 27, No. 6, pp.485-490 (2006). (EI indexed)
 
7. Kwok, T.C., To, S., Cheung, C.F., Wang, S.J. and Lee, W.B. “An investigation of form compensation in fabricating microlens array by fast tool servo technology”, Materials Science Forum, Vols. 532-533, pp. 689-692 (2006). (EI Indexed)
 
8. To, S., Wang H., Li B., Cheung, C.F., and Wang S.J. “Study on the tool path generation of an automotive headlamp reflector in ultra-precision raster milling”, Materials Science Forum, Vols. 532-533 pp.673-676 (2006). (EI Indexed)
 
9. To, S., Wang, E.Q., Lee, W.B., Cheung, C.F. “A study of a digital manufacturing procedure for freeform optics”, Materials Science Forum, Vols. 532-533, pp.693-696 (2006). (EI Indexed)
 

Journal paper - 2005

1.   李荣彬,张志辉,杜雪,高栋,王素娟, “微结构光学元件快速伺服刀架加工技术研究”, 纳米技术与精密工程, 第3期, 第3卷, 216-221页, 2005年。
 
2. 蒋金波,杜雪,李荣彬,张志辉, “用于手机背光模组的轮廓渐变V-槽形自由曲面结构的新颖设计”, 液晶与显示,第20 期, 第3卷, 178-184页, 2005年。
 
3. Li, H.F., Cheung, C.F., Lee, W.B., To, S. and Jiang, X.Q., “Characterization of surface roughness for ultra precision freeform surfaces”, Journal of Physics: Conference Series, No. 13, pp.32-35 (2005). (EI indexed)
 
4. Du, J.J., Lee, W.B., Cheung, C.F., To, S. and Yao, Y.X. “Research on software error compensation of ultra-precision lathe”, Key Engineering Materials, Vols. 315-316, pp. 602-606 (2005). (EI Indexed)
 

Journal paper - 2004

1.   李荣彬,杜雪,张志辉,高栋,赵伟明, “光学自由曲面的超精密加工技术及应用” ,制造技术与机床, 第1卷, 17-19页, 2004年。
 

Journal paper - 2003

1.   Lee, W.B., Gao, D., Cheung, C.F. and Li, J.G., “A NC tool path translator for virtual machining of precision optical products”, Journal of Materials Processing Technology, Vol. 140, pp.211-216, (Sep 2003). (SCI Impact Factor 2010: 1.570) (EI Indexed)
 
2.   Lee, W.B., Gao, D.,Cheung, C.F. and Li, J.G., “Computer-integrated optics design and tool path generation in virtual machining of aspheric surfaces”, Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture, Vol. 217, No. 9, pp.1285-1294 (2003). (SCI Impact Factor 2010: 0.699) (EI Indexed)
 
3.   李荣彬,杜雪,张志辉,高栋,赵伟明, “光学微结构的超精密加工技术”, 纳米技术与精密工程, 第1期, 第1卷, 57-61页, 2003年。
 

Journal paper - 2001

1.   Lee, W.B. and Cheung, C.F., “A dynamic surface topography model for the prediction of nano-surface generation in ultra-precision machining”, International Journal of Mechanical Sciences, Vol. 43, No. 4, pp.961-991 (Apr 2001). (SCI Impact Factor 2010: 1.266) (EI Indexed)
 

Conference papers - 2012

1.   To, S., Cheng, C.T., “Design and modeling of biomimetic structures for self-cleaning in ultraprecision machining”, Proceeding of the 6th SPIE International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), [3-0021] p.28, Apr 26-29, 2012, Xiamen, China. (Invited Talk)
 
2. Xiao, G.B., To, S. and Chen, M.J., “Study on the mechanism of chip formation in nanometric cutting of CaF2 by molecular dynamics”, Proceedings of the 12th euspen International Conference, Stockholm, Sweden, 4-8 Jun 2012, Vol. 2, pp. 149- 152.
 
3. Cheng, C. T., To, S., Chan, C.Y. and Cheung, C. F., “Fabrication of biomimetic structures for self-cleaning in ultra-precision machining”, The 12th euspen International Conference,
 
4. Stockholm, Sweden, 4-8 Jun 2012
 
5. Cheung, C.F., Kong, L.B., Ho, L.T., To, S., Wang, B. and Lai, K.T., “An integrated approach for design, ultra-precision polishing and measurement of freeform progressive lenses, Proceeding of the 6th SPIE International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), Apr 26-29,2012, Xiamen, China.
 
6. Kong, L.B., Cheung, C.F., Lee, W.B., To, S. and Chen, X.D., “A framework of an ultra-precision roller machining equipment for the fabrication of patterned microstructured optics”, Proceeding of the 6th SPIE International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), Apr 26-29, 2012, Xiamen, China.
 
7. Chong, F.F., To, S. and Chan, K.C., “Cutting characteristics of lanthanum base metallic glass in single point diamond turning , 4th International Conference of Asian Society for Precision Engineering and nanotechnology, 16-18 Nov 2011, Hong Kong, Proceedings of Precision Engineering and Nanotechnology- Key Engineering Materials, Vol. 516 (2012), pp. 651-655 (ITS/118/10).
 
8. Zhang, S.J., To, S. and Cheung, C.F., “Nonlinear dynamics of tool vibration in micro-cutting”, 4th International Conference of Asian Society for Precision Engineering and nanotechnology, 16-18 Nov 2011, Hong Kong, Proceedings of Precision Engineering and Nanotechnology- KeyEngineering Materials, Vol. 516 (2012), pp. 645-650. (PolyU 5291/08E)
 

Conference papers - 2011

1.   Cheung, C.F., “Measuring ultra-precision freeform surfaces: The past, the present and the future”, 2011 International Symposium on High-precision Free-form Surfaces: Design, Manufacture, Metrology and Applications (ISHPFFS 2011), Fudan University, Shanghai, China, Oct 28-30, 2011. (Invited talk)
 
2. Cheung, C.F., Ho, L.T., Kong, L.B., To, S., Lai, K.F., “A framework of a process modelling and optimization system for the design, fabrication and evaluation of progressive lenses”, Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, Lake Como, Italy, Vol. 2, pp.409-412, May 23-27, 2011.
 
3. Cheung, C.F., Ren, M.J., Kong, L.B., “A study of task specific uncertainty in least square based form characterization of ultra-precision freeform surfaces”, The 10th International Symposium of Measurement Technology and Intelligent Instruments (ISMTII 2011), Daejeon, Korea, 2011.
 
4. Kong, L.B., Cheung, C.F., To, S., Wang, B., Ho, L.T., “Design and Manufacturing of Progressive Addition Lenses (PAL) in Optometry”, Proceeding of ASPEN2011, The 4th International Conference of Asian Society for Precision Engineering and Nanotechnology, 16-18 Nov 2011, HKSAR, China.
 
5. Kong, L.B., “Research and development of ultra-precision freeform surfaces applied in non-imaging optics”, 2011 International Symposium on High-precision Free-form Surfaces: Design, Manufacture, Metrology and Applications (ISHPFFS 2011), Fudan University, Shanghai, China, Oct 28-30, 2011 .(Invited talk)
 
6. Lee, W.B., Wang, H., To, S., Cheung, C.F., “Applications of ultra-precision free-form machining technology to advanced optics”, The 14th International Manufacturing Conference in China, Tianjin, China, 13-15 Oct 2011. (Oral presentation)
 
7. Li, L.H., Lee, W.B., To, S., Wang, W.K., Yip M.S.,  “A novel method for the design and ultra-precision machining of the hybrid optical surface of single BD/ CBHD compatible objective lens”, EUSPEN 11th International Conference & 13th Annual General Meeting, 471V2, Como, Italy , pp. 471-475, May 2011.
 
8. To, S., “Design, fabrication and measurement of micro/ nano structures for self-cleaning”, 2011 International Symposium on High-precision Free-form Surfaces: Design, Manufacture, Metrology and Applications (ISHPFFS 2011), Fudan University, Shanghai, China. Oct 28-30, 2011. (Invited talk)
 
9. To, S., Zhang, S.J., Wang, H.T., Wang S.J., “Dynamic modeling of aerostatic bearing spindle and measurement of surface topographies in ultra-precision raster milling”, The 10th International Symposium of Measurement Technology and Intelligent Instruments (ISMTII 2011), Daejeon, Korea, CD version, paper no. P-40, 2011.
 
10. Wang, H.T., Lee, W.B., To, S., “Numerical simulation and replication of bionic microstructure for drag reduction”, EUSPEN 11th International Conference & 13th Annual General Meeting, 471V2, Como, Italy, 2011.
 
11. Zhang, S.J., To, S., Cheung, C.F., Du, J.J., “3D measurement of tool wear with the in-process image based on a new auto-regressive calibration algorithm in ultra-precision raster milling”, The 10th International Symposium of Measurement Technology and Intelligent Instruments (ISMTII 2011), Daejeon, Korea, 2011.
 

Conference papers - 2010

1.   Jiang, J.B., To, S., Lee, W.B. , Cheung, C.F., “ LED secondary optics design”, Proceeding of 3rd Lighting Symposium of China, Japan and Korea, pp.39-42, Seoul, Korea (27-29 Sep 2010)
 
2. Kong, L.B., To, S. Cheung, C.F., “A study of an integrated approach for design, ultra-precision machining and characterization of micro-structured surface with self-cleaning properties, Proceeding of 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin China, CD version, paper no. 337 (24-26 Sep 2010)
 
3. Ren, M.J., Cheung, C.F., Kong, L.B., Lee, W.B., To, S., “A study of surface reconstruction for the measurement of ultra-precision freeform surfaces”, Proceedings of the 10th International Conference of the European Society for Precision Engineering & Nanotechnology (EUSPEN), Vol. 1, pp.254-257, Delft, Netherlands. (31 May - 4 June 2010)
 
4. To, S., Cheung, C.F., Lee, W.B., “A study of cutting strategy on surface microstructural changes in ultra-precision raster milling of aluminium alloy”, Proceedings of the 10th International Conference of the European Society for Precision Engineering & Nanotechnology (EUSPEN), Vol. 2, pp.198-201, Delft, Netherlands. (31 May - 4 June 2010)
 
5. To, S., Wang, S.J., “Effect of cutting strategy on surface generation in ultra-precision raster milling”, Proceeding of 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin China, CD version, invited paper no. 380 (24-26 Sep 2010)
 
6. Wang, S.J., To, S., Cheung, C.F., “An experimental investigation on heat generation in ultra-precision raster milling” Proceeding of 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin China, CD version, paper no. 355 (24-26 Sep 2010)
 

Conference papers - 2009

1.   Cheung, C.F., Kong, L.B., Ren, M.J., Lee, W.B., To, S., “Measurement science and technology for ultra-precision freeform surfaces”, The 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2009), 2A2-6-2105-p (CD version), Kitakyushu, Japan. (11-13 Nov 2009) Invited paper
 
2. Kong, L.B., Cheung, C.F., To, S., Lee, W.B., Kwok, T.C., “An analytical study of the fabrication of microlens array using fast tool servo machining”, Proceeding of Asian Symposium for Precision Engineering and Nanotechnology 2009 (ASPEN2009), 1B-1-1821P, Kitakyushu, Japan. (CD Version) (11-13 Nov 2009)
 
3. To, S., Zhang, S.J., Cheung, C.F., Lee, W.B., Zhu, Y.H., “Effect of cutting strategy on surface microstructural changes in ultra-precision raster milling”, Proceedings of The 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2009), 2P1-5-2332-S (CD version), Kitakyusyu, Japan. (11-13 Nov 2009)
 

Conference papers - 2008

1.   蒋金波,杜雪,李荣彬, “LED路灯透镜的二次光学设计介绍”, 海峡两岸第十五届照明科技与营销研讨会论文集, pp189-197, 中国照明学会, 天津 (Nov. 2008) 。
 
2. Lee, W.B., Cheung, C.F., To, S., Kong, L.B., Jiang, J.B., “Design, fabrication and measurement of ultra-precision freeform optics using an integrated platform”, Proceedings of The 1st International Conference on Nanomanufacturing (nanoMan2008), ID- 255, Singapore. (CD Version) (14-16 July 2008)
 
3. Lee, W.B., Cheung, C.F., Kong, L.B. and To, S., “Characterization of ultra-precision freeform surfaces using an intrinsic feature-based pattern analysis”, Proceedings of 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, Zurich, Switzerland, Vol. 2, pp. 277-281 (18- 22 May 2008).
 
4. Weng, C., Lee, W. B. and To, S., “The influences of process parameters on residual stress of injection moulded microlens array”, Proceedings of 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, Zurich, Switzerland. Vol. 2, pp. 90-93 (18- 22 May 2008).
 

Conference papers - 2007

1.   Cheung, C.F., Kong, L.B., To, S. and Lee, W.B. “Measurement and characterization of ultra-precision freeform surfaces”, Proceedings of Asian Symposium for Precision Engineering and Nanotechnology 2007 (ASPEN2007), November 6-9, Gwangju, Korea, pp. 153-156 (2007).
 
2. Cheung, C.F., Kwok, T.C., To, S., Lee, W.B., Jiang, X.Q. and Li, H.F., “Measurement and characterization of surface quality in fast tool servo machining of optical microstructures”, Proceedings of The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII2007), Sept 24-27, Sendai, Japan, pp.359-362 (2007).
 
3. Cheung, C.F., To, S. and Lee, W.B., “Ultra-precision freeform machining for advanced optics manufacturing: an integrated platform for modelling, Fabrication and Surface Characterization”, National Natural Science Foundation of China (NSFC) Forum of Ultra-precision Machining Technology (国家自然科学基金委员会“超精密制造技术前沿”中青年学者高层论坛), Dec 22-23, Tianjin, China, pp.7 (2007). – Invited Paper
 
4. Cheung, C.F., To, S., Lee, W.B. and Kwok, T.C. “Characterization of surface generation for structured freeform surfaces”, Proceedings of 7th International Conference and 9th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, May 20-24, Congress Centre Bremen, Bremen, Germany, Vol. I, pp. 266-269 (2007).
 
5. Kong, L.B., Cheung, C.F., To, S. and Lee, W.B., “Development of a dynamics model for ultra-precision raster milling”, Proceeding of 1st Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), Hong Kong, 11-13 Jan. 2007, Vols. 364-366, pp. 58-63 . (2007)
 
6. Kong, L.B., Cheung, C.F., Lee, W.B., To, S.,“A study of characterization methods for optical freeform surfaces”, Proceedings of 11th International Conference on Metrology and Properties of Engineering Surfaces, July 17-20, Huddersfield, UK, pp.299-303 (2007)
 
7. Kong, L.B., Cheung, C.F., Lee, W.B., To, S., Cheng, K.W., and Cheung, N.C. “An integrated platform for the fabrication and characterization of ultra-precision freeform surfaces for automotive lighting”, Proceedings of 7th International Conference and 9th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, Vol. II, pp.265-268, Congress Centre Bremen, Bremen, Germany, 20-24 May (2007)
 
8. Kwok, T.C., Cheung, C.F., To, S. and Lee, W.B., “A framework of a surface generation model in fast tool servo (FTS) machining of optical microstructures”, Proceeding of 1st Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007) , Hong Kong, 11-13 Jan. 2007,, Vols. 364-366, pp.1274-1279. (2007)
 
9. Kwok, T.C., Cheung, C.F., To, S., Lee W.B. “Characterization of errors affecting surface generation in fast tool servo (FTS) machining”, Proceedings of ASPE’s 22nd Annual Meeting, October 14-19, Dallas, Texas, USA, Vol. 42, pp.371-374 (2007).
 
10. Lee, W.B., To, S., Cheung, C.F. and Cheung, K.C. “The design and ultra-precision freeform machining of f-theta lenses for laser scanners and printers”, Proceedings of Asian Symposium for Precision Engineering and Nanotechnology 2007 (ASPEN2007), November 6-9, Gwangju, Korea, pp. 157-160(2007).
 
11. Li., H., To, S., Kong, L.B., Cheung, C.F., Lee, W.B., “Inspection technology for f-theta lens: practices and discussions”, Proceeding of 1st Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), Hong Kong, 11-13 Jan. 2007, Vols. 364-366, pp. 1191-1196. (2007)
 
12. To, S., Wang, H., Li, B., and Cheung, C.F., “An empirical approach for identification of sources of machining errors in ultra-precision raster milling”, Proceeding of 1st Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), Hong Kong, 11-13 Jan. 2007, Vols. 364-366, pp. 986-991. (2007)
 
13. Wang, S.J., To, S., Cheung, C.F., and Lee, W.B. “A study of surface scallop generation for freeform surfaces in ultra-precision raster milling”, Proceedings of 7th International Conference and 9th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, May 20-24, Congress Centre Bremen, Bremen, Germany, Vol. II, pp.412-415 (2007).
 
14. Wang, S.J., To, S., Cheung, C.F. and Lee, W.B., “A study of the scallop generation mechanism in ultra-precision raster milling”, Proceeding of 1st Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), Hong Kong, 11-13 Jan. 2007, Vols. 364-366, pp. 1262-1267 (2007)
 

Conference papers - 2006

1.   Cheung, C.F. Jiang, X.Q., To, S., Lee, W.B. and Li, H.F. “A study of pattern and feature analysis of surface generation in fast tool servo machining of optical microstructures”, Proceedings of ASPE’s 21th Annual Meeting, October 15-20, Monterey, USA, pp.321-324 (2006).
 
2. Cheung, C.F., Kwok, T.C., Li, H.F., To, S. and Lee, W.B. “A study of factors affecting surface quality in fast tool servo machining of micro-lens array”, Proceedings of 2006 International Conference on Micro/Nano Fabrication Technologies (ICM/NFT’06), May 10-12, Bangkok, Thailand, CD version (2006).
 
3. Jiang, J.B., Cheung, C.F., To, S., Cheng, K.W., Wang, H. and Lee, W.B. “Design and fabrication of freeform reflector for automotive headlamp”, Proceedings of 2nd International Conference on Power Electronics Systems and Applications, November 12-14, Hong Kong, pp. 221-225 (2006).
 
4. Lee, W.B., To, S. and Cheung, K C., “Micromachining of freeform surfaces for optical applications” , The 7th International Conference on Frontiers of Design and Manufacturing, pp.8-11, 19-22 June 2006, Guangzhou, China (2006)
 
5. To, S., Jiang, J.B., Lee, W.B., Cheung, C.F. and Cheng, K.W., “Design and fabrication of LED lighting systems for automobile illumination” , The 7th International Conference on Frontiers of Design and Manufacturing, pp205-208, 19-22 June 2006, Guangzhou, China (2006)
 
6. To, S., Kwok, T.C., Cheung, C.F., Lee, W.B., “Study of ultra-precision diamond turning of a microlens array with a fast tool servo system”, Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE), Vol. 6149, No. 1-6, pp. S1490 (2006).
 
7. To, S., Wang, S.J., Cheung, C.F., Lee, W.B., “A study on the tool path generation of V-grooves in ultra-precision freeform machining”, Proceedings of 2006 International Conference on Micro/Nano Fabrication Technologies (ICM/NFT’06), May 10-12, Bangkok, Thailand, CD version (2006).
 
8. To, S., Yin, Z. Q., Cheung, C.F. and Lee, W.B., “Study on the wear of diamond toolings in ultra-precision raster milling” Advances in Materials and Processing Technologies, 30 Jul. -3 Aug. 2006, Las Vegas, Nevada, USA (2006)
 

Conference papers - 2005

1.   Cheng, M.N. , Cheung, C.F., Lee, W.B. and To, S., “Optimization of surface finish in ultra-precision raster milling”, Proceedings of The 3rd International Conference on Leading Edge Manufacturing in 21st Century (LEM21), October 19-22, Nagoya, Japan, Vol. 3, pp. 1019-1024 (2005).
 
2. Cheung, C.F., Kong, L.B., Lee, W.B. and To, S. “Model-based simulation of freeform surface generation in ultra-precision raster milling”, Proceedings of The 3rd International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol. 3, pp.1087-1092, Nagoya, Japan, 19-22 October (2005).
 
3. To, S., Jiang, J.B., Lee, W.B. and Cheung, C.F. “Design and fabrication of micro lens array and V-groove for LED backlight module”, 20th Congress of the International Commission for Optics, Proceedings of SPIE, Vol. 6034, pp.446 August 21-26, Changchun, China, (2005).
 
4. Cheung, C.F., Lee, W.B. and To, S. “A framework of a model-based simulation system for the prediction of surface generation in ultra-precision raster milling of freeform surfaces,” Proceedings of ASPE’s 19th Annual Meeting, Orlando, Florida, USA, 24-29 October (2004) (in CD format)
 

Books

1.   Cheung, C.F. and Lee, W.B., “Surface generation in ultra-precision diamond turning: Modelling and Practices”, Professional Engineering Publishing Limited, UK, 267 pages (2003)
 
2. 李荣彬,杜雪及张志辉编著,自由曲面光学设计与先进制造技术,香港理工大学先进性,光学制造中心ISBN962-367-476-7,237页(2005年7月初版)
 
3. 张志辉,杜雪,李荣彬,王波及蒋金波编著, 先进汽车照明系统电子及光学设计与制造,第二卷-先进光学组件, ISBN 9-789623-675956, 282页 (2007年11月初版) (2007)
 

Technical papers

1.   李荣彬, “自由曲面光学组件的设计加工及面形测量之综合制造系统”, 中国科技奖励, 2008年 05期, 20-22页, ISSN1672-903X.
 
2. 张志辉,孔令豹,杜雪及李荣彬,“超精密光学自由曲面测量技术的研究",全国计量测试论文集 - 计量测试(技术篇), p.149-156 (2007). , ISBN 978-7-5026-1793-4. (Dec 2007)
 

 

Copyright © 2013 SKL. PolyU. All Rights Reserved.